DIRECTIONS
Open HoursMON to THU:
8:00 am to 5:00 pm
FRI:
8:00 am to 4:00 pm

Mower bar Jansen THS-180, tractor pruning mowerbar

item number: 1775127
€2,449.00  

Prices incl. VAT, plus shipping costs

Availability

Item in stock1


Shipping costs:
Average Rating (3)
From Jürgen Buch 05/07/2023 21:05

Super Gerät.  

Super Gerät. Top zufrieden. Da macht Hecke schneiden Spaß.

From B. Kraemer 17/11/2022 13:33

sehr gut - jederzeit nochmal  

Die THS 180 wurde sehr ordentlich verpackt angeliefert. Die teilmontierte Maschine konnte in 2h bequem vollständig aufgebaut werden. Zur Fixierung des Mähbalkens wurde für 10 Minuten ein 2. Helfer benötigt. Die THS... continue reading

From Sven Althaus 20/03/2019 15:56

bequemer kann man seine Hecke nicht schneiden  

Habe meine Buchenhecken immer umständlich von Hand geschnitten, teilweile auf der Leiter, um überall ran zu kommen. Nun mit dem THS-180 am Frontlader vom Schmalspur geht es viel schneller, sauberer und einfacher. Die... continue reading

Thanks to its quiet operation and clean cutting profile, our Tractor Hedge Cutter Jansen THS-180 is ideally suited to the regular maintenance of hedges and bushes in private, municipal and agricultural areas. Depending on the condition of the wood and quantity to be cut, the robust knife blades can detach branches with a diameter of max. 3cm as well as very thin branches.

This hedge cutter can be fitted to tractors, compact tractors, yard loaders as well as wheel loaders and front loaders using Euro adaptors. The cutting device is powered through the tractor’s hydraulic system. It also has an additional pallet fork attachment and can therefore be used even more flexibly.

The cutter bar has an effective working width of 180cm and weighs approximately 270kg. The cutting saw is hydraulically powered and can be mounted on a wheel loader, telescopic handler or a tractor front loader. The boom can be mechanically extended sideways by around 80cm and adjusted horizontally to suit the particular cutting situation. The counterweight mounted on the side has a minimal vibration effect on the carrier vehicle, even when the Hedge Cutter is fully extended.

Required hydraulic connectors on the carrier vehicle: 1x dual-purpose. You will also require a 12 volt connection for the electromagnetic control valve.

Expand the range of uses and mount our optionally available Jansen AS-400K branch saw on the base frame of the THS-180. With the Jansen AS-400K branch saw, you can easily cut through branches up to 80 mm thick in seconds. The AS-400K features smooth running and a very clean cut pattern, making it excellent for pruning bushes and also trees.

  • Click here to go directly to the product: Jansen Pruning Saw AS-400K


  • Compare our products with competing products! Not only have we developed these devices ourselves, but we also offer you an expert service (workshop staffed by qualified technicians) and replacement parts. We usually have every part in stock. Should you have any further questions, please do not hesitate to phone us. Your call will be answered by a competent member of staff, not by a call centre agent.

    Virtually all our products are assembled and ready for operation in our exhibition hall. You’re welcome to try them out! We ask that you arrange an appointment if you wish to do so.

    Technical data:
    • Adapter: Euro front loader adapter and pallet fork attachment
    • Cutter bar power: hydraulic
    • Effective cutting width: 180cm
    • Branch diameter depending on type of wood: max. 3cm
    • Sideways extension (manual): 80cm
    • Operating speed: 2-4 km/h
    • Hydraulic connections: 1x dual-purpose
    • 12 volt connection for electromagnetic control valve required
    • Oil pressure: 140-180 bar
    • Hydraulic flow rate: min. 15 l/min
    • Weight: approx. 270 kg
    • Weight including packaging: approx. 305 kg
    • Package dimensions: 188x77x60cm (LxWxH)

    Notes:

    The device is delivered well packed and part-assembled in a wooden crate. You should allow approx. 2-3 hours for final assembly. Instructions for use in German are included in the scope of delivery. The assembly is relatively simple and does not require specialist knowledge. In the event that you require any assistance, we are happy to help you.


    Important note cutter bar:

    Please ensure that you do not operate the cutter bar at too high a speed, otherwise the connecting rod may be damaged! For orientation, we recommend that you watch our product video (www.youtube.com/watch?v=HvSsc9J553E). From minute 2:03 you can see approximately how high the speed should be.

    Internal item#: 1032691775

    Read, write and discuss reviews... more
    Write a review:
    Evaluations will be activated after verification.
    Please enter these characters in the following text field.

    ** = required field

    I have read the data protection information.

    Customer evaluation for "Mower bar Jansen THS-180, tractor pruning mowerbar"
    5 Jul 2023

    Super Gerät.

    Super Gerät. Top zufrieden. Da macht Hecke schneiden Spaß.

    17 Nov 2022

    sehr gut - jederzeit nochmal

    Die THS 180 wurde sehr ordentlich verpackt angeliefert. Die teilmontierte Maschine konnte in 2h bequem vollständig aufgebaut werden. Zur Fixierung des Mähbalkens wurde für 10 Minuten ein 2. Helfer benötigt. Die THS ist an einem älteren 50 PS Schlepper-Frontlader mit Euroaufnahme montiert und tut was sie soll. Äste von 4 cm Stärke (Weide, Ahorn) lassen sich schneiden. Ideal für Aststärken von 1-3 cm. Ich bin Privatnutzer. Das Team von Jansen hat alle Fragen schnell und kompetent bearbeitet und unkomplizierte Unterstützung nach einer Fehlbedienung geleistet. Vielen Dank!

    20 Mar 2019

    bequemer kann man seine Hecke nicht schneiden

    Habe meine Buchenhecken immer umständlich von Hand geschnitten, teilweile auf der Leiter, um überall ran zu kommen. Nun mit dem THS-180 am Frontlader vom Schmalspur geht es viel schneller, sauberer und einfacher. Die Schere ist einfach im Gebrauch und sehr übersichtlich. Zwar muss man sich noch nen Schalter mit Kabel in die Kabine legen, ist aber zu schaffen als Hobbybastler. Diese Heckenschere ist die optimale Lösung für mich und meinen Buchenhecken.

    Verification of the authenticity of customer reviews

    Every consumer review is checked for authenticity before it is published, ensuring that reviews only come from consumers who have actually purchased/used the products being reviewed.
    Previously viewed items